D5K2 Tier 4 Final/Stage IV

Heavy Equipment

D5K2 Tier 4 Final/Stage IV

Power - Net
104 HP / 77.6 kW
Operating Weight - XL
20313 lb / 9214 kg
Operating Weight - LGP
20992 lb / 9522 kg

D5K2 Track-Type Tractor

Engine
Engine Model Cat C4.4
Power - Net 104 HP / 77.6 kW
Displacement 269 in³ / 4.4 l
Bore 4.13 in / 105 mm
Stroke 5 in / 127 mm
Note Engine meets U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) emission standards.
Rated Net Power - 2,200 rpm - ISO 9249/EEC 80/1269 104 HP / 77.6 kW
Rated Net Power - 2,200 rpm - SAE J1349 104 HP / 77.6 kW
Transmission
Drive Pumps 1
Maximum Travel Speed - Forward 5.6 mile/h / 9 km/h
Maximum Travel Speed - Reverse 6.2 mile/h / 10 km/h
Relief Valve Settings 7033 psi / 48500 kPa
Track Motors 2
Weights
Operating Weight - XL 20313 lb / 9214 kg
Operating Weight - LGP 20992 lb / 9522 kg
Note Specs are for machine equipped with dozer blade, canopy ROPS, back-up alarm, operator, coolant, lubricants and full fuel tank.
Operating Weight - LGP, 762 mm/30 in 21442 lb / 9726 kg
Service Refill Capacities
Cooling System 5.92 gal (US) / 22.4 l
Crankcase - With Filter 2.91 gal (US) / 11 l
Final Drive - Each - LGP 2.6 gal (US) / 10 l
Final Drive - Each - XL 2.6 gal (US) / 10 l
Fuel Tank 51.5 gal (US) / 195 l
Transmission - Hydraulic Tank 15.7 gal (US) / 59.5 l
Diesel Exhaust Fluid (DEF) Tank 4.9 gal (US) / 19 l
Hydraulic Controls
Pump Output 17.7 gal/min / 68 l/min
Relief Valve Settings 2988 psi / 20600 kPa
Undercarriage
Ground Contact Area - LGP 4726 in² / 30492 cm²
Ground Contact Area - LGP, 762 mm (30 in) 5514 in² / 35574 cm²
Ground Contact Area - XL 3652 in² / 23562 cm²
Ground Pressure - LGP 4.5 psi / 31.1 kPa
Ground Pressure - LGP, 762 mm (30 in) 3.93 psi / 27.1 kPa
Ground Pressure - XL 5.6 psi / 38.6 kPa
Length - Track on Ground - LGP 91 in / 2310 mm
Length - Track on Ground - XL 91 in / 2310 mm
Shoe Width - LGP 26 in / 660 mm
Shoe Width - LGP, 762 mm (30 in) 30 in / 762 mm
Shoe Width - XL 20 in / 510 mm
Track Gauge - LGP 69 in / 1750 mm
Track Gauge - LGP, 762 mm (30 in) 73.2 in / 1860 mm
Track Gauge - XL 63 in / 1600 mm
Length - Track on Ground - LGP, 762 mm (30 in) 91 in / 2310 mm
Number of Rollers - Each Side 7
Number of Shoes - Each Side - Sealed and Lubricated Track (SALT) Undercarriage 40
Number of Shoes - Each Side - SystemOne Undercarriage 36
Ripper
Type Parallelogram
Number of Shanks 3
Height 6.5 in / 165 mm
Weight 1222 lb / 554 kg
Maximum Digging Depth 13.3 in / 337.5 mm
Maximum Ground Clearance Under Tip 17.6 in / 448 mm
Maximum Reach - Ground Line 21.9 in / 555 mm
Overall Width 67.3 in / 1710 mm
Winch
Weight 1345 lb / 610 kg
Winch Drive Hydrostatic
Control Hydraulic
Speed Variable
Drum Capacity - Optional Cable 256 ft / 78 m
Drum Capacity - Recommended Cable 371 ft / 113 m
Drum Diameter 10 in / 254 mm
Drum Width 10.8 in / 274 mm
Maximum Line Pull - Bare Drum 40000 lb / 18144 kg
Maximum Line Pull - Full Drum 25000 lb / 11340 kg
Maximum Line Speed - Bare Drum 131 ft/min / 40 m/min
Maximum Line Speed - Full Drum 207 ft/min / 63 m/min
Overall Width 29.2 in / 741 mm
Rope Diameter - Optional 0.75 in / 19 mm
Rope Diameter - Recommended 0.63 in / 16 mm
Throat Clearance 6.75 in / 171.5 mm
Winch Length 27.76 in / 705 mm
Cab
FOPS ISO 3449:2005 Level II
ROPS ISO 6396:2008
Sound Levels - ISO 6396:2008 79 dB(A)
Sound Levels - SAE J1166 FEB2008 79 dB(A)
Dimensions
BLADE: Blade Capacity (SAE) - Intermediate 2.73 yd³ / 2.09 m³
BLADE: Blade Capacity (SAE) - LGP 3.06 yd³ / 2.34 m³
BLADE: Blade Capacity (SAE) - XL 2.86 yd³ / 2.19 m³
BLADE: Blade Cutting Edge Angle, Adjustable - Intermediate 52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - LGP 52° to 58°
BLADE: Blade Cutting Edge Angle, Adjustable - XL 52° to 58°
BLADE: Blade Height - Intermediate 39.8 in / 1010 mm
BLADE: Blade Height - LGP 39.8 in / 1010 mm
BLADE: Blade Height - XL 42.2 in / 1073 mm
BLADE: Blade Lift Height - Intermediate 30.2 in / 767 mm
BLADE: Blade Lift Height - LGP 30.2 in / 767 mm
BLADE: Blade Lift Height - XL 30.2 in / 767 mm
BLADE: Blade Width - Intermediate 115 in / 2921 mm
BLADE: Blade Width - LGP 126.7 in / 3220 mm
BLADE: Blade Width - XL 109.5 in / 2782 mm
BLADE: Blade Width at Maximum Angle - Intermediate 105.1 in / 2669 mm
BLADE: Blade Width at Maximum Angle - LGP 115.8 in / 2940 mm
BLADE: Blade Width at Maximum Angle - XL 103.8 in / 2636 mm
BLADE: Digging Depth - Intermediate 22.5 in / 572 mm
BLADE: Digging Depth - LGP 22.5 in / 572 mm
BLADE: Digging Depth - XL 23.1 in / 586 mm
BLADE: Maximum Angle (either side) - Intermediate 25°
BLADE: Maximum Angle (either side) - LGP 25°
BLADE: Maximum Angle (either side) - XL 25°
BLADE: Maximum Tilt - Intermediate 17.6 in / 448 mm
BLADE: Maximum Tilt - LGP 17.6 in / 448 mm
BLADE: Maximum Tilt - XL 15.8 in / 402 mm
Ground Clearance - LGP 13 in / 332 mm
Ground Clearance - LGP, 770 mm (30 in) Shoes 13 in / 332 mm
Ground Clearance - XL 13 in / 332 mm
Length - Basic Tractor - Without Blade - LGP 128.5 in / 3265 mm
Length - Basic Tractor - Without Blade - LGP, 770 mm (30 in) Shoes 128.5 in / 3265 mm
Length - Basic Tractor - Without Blade - XL 128.5 in / 3265 mm
Overall Length - With Blade - LGP 169.1 in / 4309 mm
Overall Length - With Blade - LGP, 770 mm (30 in) Shoes 169.1 in / 4309 mm
Overall Length - With Blade - XL 170.1 in / 4309 mm
Track Gauge - LGP 68.9 in / 1750 mm
Track Gauge - LGP, 770 mm (30 in) 73.2 in / 1860 mm
Track Gauge - XL 63 in / 1600 mm
Tractor Height - LGP 109 in / 2769 mm
Tractor Height - LGP, 770 mm (30 in) 109 in / 2769 mm
Tractor Height - XL 109 in / 2769 mm
Width - Tractor - Standard Shoes - No Blade - LGP 94.9 in / 2410 mm
Width - Tractor - Standard Shoes - No Blade - LGP (770 mm/30 in) 103.5 in / 2630 mm
Width - Tractor - Standard Shoes - No Blade - XL 83.1 in / 2110 mm

Standard Equipment

  • ELECTRICAL
    • Alternator, 12 volt, 120 Amp, heavy duty brushless
    • Alarm, backup
    • Batteries (2), heavy duty, maintenance free, 2,000 CCA
    • Diagnostic connector
    • Horn, electric
    • Lights, halogen, 2 front and 2 rear
    • Starter, electric, 12 volt
  • OPERATOR STATION
    • ROPS/FOPS canopy
    • Seat, air suspended, cloth or vinyl
    • Seatbelt, retractable 76 mm (3 in)
    • Foot pads, dash
    • Electronic Monitoring System with: – Gauges for engine coolant temperature, hydraulic oil temperature and fuel level – Travel speed limiter, electronic – Engine RPM and gear display – Hour meter, electric – Engine air cleaner service indicator, electronic – Water-in-fuel indicator, electronic
    • Slope Indicate
    • Throttle switch, rotary
    • Eco mode
    • Controls, seat mounted, fore/aft adjustment
    • Armrests, adjustable
    • Mirror, rearview, inside
    • Single pedal combining deceleration and braking functions
    • Independent forward/reverse speed settings
    • Power port, 12 volt
    • Coat hook
    • Storage compartment
    • Cup holder
    • Floor mat, rubber, heavy duty
  • HYDRAULICS
    • Hydraulics, 3 valve
    • Load sensing hydraulics
    • Single lever, three function control
    • Hydraulic pump and oil
    • Stable blade control
  • POWER TRAIN
    • Cat C4.4 diesel engine, turbocharged, U.S. EPA Tier 4 Final/EU Stage IV/Japan 2014 (Tier 4 Final) certified with aftertreatment
    • Aftercooler, Air-to-Air (ATAAC)
    • Aluminum bar plate cooling system (radiator, power train)
    • Air cleaner with precleaner, automatic dust ejection and under-hood intake
    • Dual path, closed-loop hydrostatic transmission
    • Electric fuel priming pump
    • Fuel/water separator
    • Automatic Traction Control
  • UNDERCARRIAGE
    • SALT Undercarriage
    • 7 roller track frame
    • Track rollers, lifetime lubricated
    • Carrier rollers
    • Track adjusters, hydraulic
    • Guards, front/rear guiding
    • Master link
  • OTHER STANDARD EQUIPMENT
    • Cat Product Link™ PL631 Satellite/PL641 Cellular
    • C-Frame, VPAT, hydraulic cylinders and lines
    • Lockable engine enclosures
    • Front pull device
    • Rigid drawbar
    • Ecology drains (engine, power train and implement oil and engine coolant)
    • Scheduled oil sampling ports (engine, power train implement oil)
    • Vandalism protection
    • Heavy duty crankcase guard
  • ANTIFREEZE
    • Extended life coolant, –37° C (–35° F)

Optional Equipment

  • ELECTRICAL
    • Integrated four front halogen lights, two rear halogen lights
  • POWER TRAIN
    • Drive, auxiliary
    • Installation, winch
  • UNDERCARRIAGE
    • Track Pairs, XL: – Track, 510 mm (20 in) MS SystemOne
    • Track Pairs, LGP: – Track, 660 mm (26 in) MS SystemOne – Track, 762 mm (30 in) MS SystemOne
  • OPERATOR STATION
    • Cab with air conditioning*
    • Cab, polycarbonate windows and air conditioning*
    • Seat, air suspension, choice of: – Vinyl, heated seat with heated controls – Cloth, heated seat with heated controls – Cloth, heated and ventilated seat with heated controls
    • Radio, AM/FM, Bluetooth
    • Sound suppression
    • *Air Conditioning System: The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 1.6 kg) of refrigerant which has a CO2 equivalent of 2.288 metric tonnes.
  • HYDRAULICS
    • Hydraulics, 4 valve for use with ripper
    • Hydraulics, 4 valve for use with winch
  • GUARDS
    • Guard, rear, heavy duty
    • Grill, radiator, heavy duty
    • Guard, track guiding, center
    • Guard, track roller, full length
    • Screen, rear, cab
    • Screen, side, cab
    • Screen, rear, canopy
    • Screen, front and doors, canopy
    • Sweeps, front
    • Sweeps, rear
  • BLADES
    • VPAT XL blade
    • VPAT LGP blade
    • VPAT Intermediate blade
  • REAR ATTACHMENTS
    • Drawbar, towing
    • Mounting, winch
    • Ripper, parallelogram, includes three shanks and teeth
  • REAR ATTACHMENT CONTROL
    • Control, ripper
    • Control, winch
    • Control, ripper and winch
  • MACHINE CONTROL AND GUIDANCE
    • Installation, AccuGrade ready, includes Cat Grade Control Slope Assist
    • Power Pitch blade control
  • STARTING AIDS
    • Heater, engine, coolant, 120 volt
    • Starting aid, ether
  • OTHER ATTACHMENTS
    • Machine Security System
  • ANTIFREEZE
    • Extended life coolant, –50° C (–58° F)
  • FIELD INSTALLED ATTACHMENT
    • Winch, hydrostatic
Contact Us
x

We're here to help

We'll do our best to get back to you as soon as possible.