PM620
- Milling Width
- 79.1 in / 2010 mm
- Rated Power
- 636 hp / 474 kW
- Operating Weight
- 73480 lb / 33330 kg
The PM620 is a high-production, half-lane milling machine with a cutting width of 2010 mm (79.1 in) that performs controlled full-depth removal of asphalt and concrete pavements in a single pass.
| Cutting System | |
|---|---|
| Milling Width | 79.1 in / 2010 mm |
| Maximum Milling Depth | 13 in / 330 mm |
| Rotor Speeds | 100 / 109 / 118 rpm |
| Number of Bits | 178 |
| Power Train | |
|---|---|
| Rated Power | 636 hp / 474 kW |
| Engine | Cat C18 |
| Maximum Travel Speed | 3.7 mile/h / 5.9 km/h |
| Maximum Milling Speed | 328 ft/min / 100 m/min |
| Weights | |
|---|---|
| Operating Weight | 73480 lb / 33330 kg |
| Transport Weight | 64882 lb / 29430 kg |
| Dimensions | |
|---|---|
| Operating Length - Conveyor Up | 47.64 ft / 14.52 m |
| Operating Width | 10.2 ft / 3.11 m |
| Height - Canopy | 13.29 ft / 4.05 m |
| Maximum Truck Clearance | 15.94 ft / 4.86 m |
| Minimum Right Cutting Radius | 6.56 ft / 2 m |
| Minimum Left Cutting Radius | 6.56 ft / 2 m |
| Conveyor Swing | 60 degrees from center |
| Transport Length | 40.78 ft / 12.43 m |
| Transport Width | 8.14 ft / 2.48 m |
| Transport Height | 9.84 ft / 3 m |
| Service Refill Capacities | |
|---|---|
| Cooling System | 22.5 gal (US) / 85 l |
| Engine Oil | 17.2 gal (US) / 65 l |
| Fuel Tank | 292.7 gal (US) / 1108 l |
| Diesel Exhaust Fluid (DEF) Tank | 12.4 gal (US) / 47 l |
| Water Spray System Tank | 898.2 gal (US) / 3400 l |
| Hydraulic Tank | 29.9 gal (US) / 113 l |
