TL642D

Heavy Equipment

TL642D

Rated Load Capacity
6500 lb / 2948 kg
Maximum Lift Height
42 ft / 12.8 m
Operating Weight
22002 lb / 9980 kg

Engine
Engine Model Cat® C3.4B
Gross Power - Basic 100 HP / 75 kW
Note Meets U.S. EPA Tier 4 Final emission standards.
Weights
Operating Weight 22002 lb / 9980 kg
Operating Specifications
Rated Load Capacity 6500 lb / 2948 kg
Maximum Lift Height 42 ft / 12.8 m
Maximum Forward Reach 30 ft / 9.1 m
Top Travel Speed 21 mile/h / 33 km/h
Capacity at Maximum Height 6500 lb / 2949 kg
Capacity at Maximum Reach 700 lb / 317 kg
Drawbar Pull - Loaded 19783 lbf / 88 kN
Frame Leveling 10°
Turning Radius - Over Tires 12 ft / 3.7 m
Tires
Standard 370/75-28 Air Duraforce
Optional (1) 370/75-28 Foam Duraforce
Optional (2) 13.00 × 24-16 PR Air
Optional (3) 13.00 × 24-12 PR Foam Filled
Optional (4) 13.00 × 24 Solid
Hydraulic System
Gear Pump Single-section
Auxiliary Hydraulic Flow 18 gal/min / 68 l/min
Auxiliary Hydraulic Pressure 3481 psi / 240 bar
Note Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure 3770 psi / 260 bar
Service Refill Capacities
Fuel Tank 38.3 gal (US) / 145 l
Diesel Exhaust Fluid (DEF) Tank 5.7 gal (US) / 21.5 l
Hydraulic System 40 gal (US) / 151.5 l
Boom Performance
Boom Up 15 s
Boom Down 10.3 s
Tele In 9.5 s
Tele Out 16.3 s
Brakes
Parking Brakes Wet disc, spring applied hydraulic release on front axle
Service Brakes Inboard wet disc brakes on front and rear axles
Axles
Type (1) Trunnion mounted planetary 55 degree steer axles.
Type (2) High bias limited slip differential on front axle.
Transmission Speeds
Forward 4 speed
Reverse 3 speed
Work Tools
Carriages - Dual Fork Positioning 50 in / 1270 mm
Carriages - Side Shift 48 in / 1220 mm
Carriages - Standard Rotate 50 in / 1270 mm
Carriages - Standard Tilt 50 in / 1270 mm
Carriages - Swing 100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate 72 in / 1829 mm
Carriages - Wide Tilt 72 in / 1829 mm
Cubing Forks [2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Hydraulic IT Coupler Includes Auxiliary Electrics
Lumber Forks - Option 1 [2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks - Option 2 [2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1 [2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 2 [2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3 [2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)
Contact Us
x

We're here to help

We'll do our best to get back to you as soon as possible.