TL642D with Stabilizers

Engine
Engine Model	Cat® C3.4B
Gross Power - Basic	100 HP / 75 kW
Note	Meets U.S. EPA Tier 4 Final emission standards.

Weights
Operating Weight	22928 lb / 10400 kg

Operating Specifications
Rated Load Capacity	6500 lb / 2948 kg
Maximum Lift Height	42 ft / 12.8 m
Maximum Forward Reach	30 ft / 9.1 m
Top Travel Speed	20 mile/h / 32 km/h
Capacity at Maximum Height (o/r Down)	6500 lb / 2949 kg
Capacity at Maximum Height (o/r Up)	6000 lb / 2722 kg
Capacity at Maximum Reach (o/r Down)	1700 lb / 771 kg
Capacity at Maximum Reach (o/r Up)	600 lb / 272 kg
Drawbar Pull - Loaded	19783  / 88 kN
Frame Leveling	10°
Turning Radius - Over Tires	12 ft / 3.7 m

Tires
Standard	370/75-28 Air Duraforce
Optional (1)	370/75-28 Foam Duraforce
Optional (2)	13.00 × 24-16 PR Air
Optional (3)	13.00 × 24-12 PR Foam Filled
Optional (4)	13.00 × 24 Solid

Hydraulic System
Gear Pump	Single-section
Auxiliary Hydraulic Flow	18 gal/min / 68 l/min
Auxiliary Hydraulic Pressure	3481 psi / 240 bar
Note	Auxiliary Hydraulic Circuit used for all attachments equipped with cylinders or other hydraulic components.
System Operating Pressure	3770 psi / 260 bar

Service Refill Capacities
Fuel Tank	38.3 gal (US) / 145 B
Diesel Exhaust Fluid (DEF) Tank	5.7 gal (US) / 21.5 B
Hydraulic System	42 gal (US) / 158 B

Boom Performance
Boom Up	15.5 s
Boom Down	10.7 s
Tele In	11.8 s
Tele Out	17 s

Brakes
Parking Brakes	Wet disc, spring applied hydraulic release on front axle
Service Brakes	Inboard wet disc brakes on front and rear axles

Axles
Type (1)	Trunnion mounted planetary 55 degree steer axles
Type (2)	High bias limited slip differential on front axle

Transmission Speeds
Forward	4 speed
Reverse	3 speed

Work Tools
Carriages - Dual Fork Positioning	50 in / 1270 mm
Carriages - Side Shift	48 in / 1220 mm
Carriages - Standard Rotate	50 in / 1270 mm
Carriages - Standard Tilt	50 in / 1270 mm
Carriages - Swing	100°, 1829 mm, 2948 kg Capacity, 2268 kg Swung (100°, 72 in, 6,500 lb Capacity, 5,000 lb Swung)
Carriages - Wide Rotate	72 in / 1829 mm
Carriages - Wide Tilt	72 in / 1829 mm
Cubing Forks	[2] 1220 mm, 50 mm × 50 mm ([2] 48 in, 2 in × 2 in)
Hydraulic IT Coupler	Includes Auxiliary Electrics
Lumber Forks - Option 1	[2] 1525 mm, 45 mm × 180 mm ([2] 60 in, 1.75 in × 7 in)
Lumber Forks - Option 2	[2] 1829 mm, 50 mm × 150 mm ([2] 72 in, 2 in × 6 in)
Pallet Forks - Option 1	[2] 1220 mm, 60 mm × 125 mm ([2] 48 in, 2.36 in × 5 in)
Pallet Forks - Option 2	[2] 1220 mm, 60 mm × 100 mm ([2] 48 in, 2.36 in × 4 in)
Pallet Forks - Option 3	[2] 1525 mm, 60 mm × 150 mm ([2] 60 in, 2.36 in × 6 in)