914M

Heavy Equipment

914M

Maximum Gross Power
100 HP / 74 kW
Operating Weight
19315 lb / 8761 kg
Rated Bucket Capacity
2.5 yd³ / 1.9 m³

Engine
Net Power 97 HP / 72 kW
Engine Model Cat C4.4 ACERT�
Maximum Gross Power - ISO 14396 100 HP / 74 kW
Maximum Gross Power - ISO 14396 (DIN) 101 HP / 74 kW
Maximum Gross Power - Maximum Engine Speed 2350 r/min
Maximum Gross Power - SAE J1995 102 HP / 76 kW
Rated Net Power - Rated Engine Speed 2200 r/min
Rated Net Power - SAE J1349 96 HP / 72 kW
Maximum Gross Power 100 HP / 74 kW
Bore 4.13 in / 105 mm
Displacement 268 in³ / 4.4 l
Emissions Engine meets U.S. EPA Tier 4 Final/EU Stage IV emission standards.
Maximum Gross Torque - ISO 14396 332 ft·lbf / 450 N·m
Maximum Gross Torque - SAE J1995 336 ft·lbf / 455 N·m
Maximum Net Torque - ISO 9249 329 ft·lbf / 446 N·m
Maximum Net Torque - SAE J1349 325 ft·lbf / 441 N·m
Note Net power advertised is the power available at the flywheel plus front drive implement pump when the engine is equipped with fan, air cleaner, muffler and alternator.
Rated Net Power - ISO 9249 97 HP / 72 kW
Rated Net Power - ISO 9249 (DIN) 98 HP / 72 kW
Stroke 5 in / 127 mm
Weights
Operating Weight 19315 lb / 8761 kg
Service Refill Capacities
Cooling System 5.7 gal (US) / 21.5 l
Fuel Tank 40.7 gal (US) / 154 l
Engine Crankcase 2.3 gal (US) / 8.8 l
Hydraulic System - Including Tank 25.9 gal (US) / 98 l
Axles - Front Center Differential 2 gal (US) / 7.5 l
Axles - Rear Center Differential 2 gal (US) / 7.5 l
Diesel Exhaust Fluid (DEF) Tank 5 gal (US) / 18.9 l
Hydraulic Tank 14.5 gal (US) / 55 l
Note DEF used in Cat SCR systems must meet the requirements outlined in the International Organization for Standardization (ISO) standard 22241-1.
Transmission 0.9 gal (US) / 3.4 l
Operating Specifications
Rated Bucket Capacity 2.5 yd³ / 1.9 m³
Buckets
Bucket Capacities 1.3-1.9 m3 (1.7-2.5 yd3)
Cab
ROPS ISO 3471:2008
FOPS ISO 3449:2005 Level II
Note (1) Cab and Rollover Protective Structures (ROPS) are standard in North America and Europe.
Note (2) The declared dynamic operator sound pressure levels per ISO 6396:2008*, when properly installed and maintained, is 77 dB(A).
Note (3) The labelled sound power level for the CE marked configurations when measured according to the test procedure and conditions specified in 2000/14/EC is 103 dB(A).
Note (4) *The measurements were conducted with the cab doors and windows closed.
Axles
Front Fixed; Locking differential (standard)
Rear Oscillating �11 degrees; Locking differential (Standard)
Loader Hydraulic System
Hydraulic Cycle Time - Dump, at Maximum Reach 1.4 s
Hydraulic Cycle Time - Float Down, Maximum Lift to Ground Level 3.7 s
Hydraulic Cycle Time - Rackback 2.2 s
Hydraulic Cycle Time - Raise, Ground Level to Maximum Lift 5.2 s
Hydraulic Cycle Time - Total Cycle Time 12.5 s
Maximum Flow - Implement Pump 39 gal/min / 148 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, High 32 gal/min / 120 l/min
Maximum Flow - Implement Pump - 3rd Function, Maximum Flow, Standard 24 gal/min / 90 l/min
Maximum Flow - Implement Pump - 4th Function, Maximum Flow 24 gal/min / 90 l/min
Maximum Working Pressure - Implement Pump 4061 psi / 28000 kPa
Relief Pressure - Tilt Cylinder 4931 psi / 34000 kPa
Relief Pressure - Tilt Cylinder - 3rd Function Maximum Working Pressure 3046 psi / 21000 kPa
Relief Pressure - Tilt Cylinder - 4th Function Maximum Working Pressure 3046 psi / 21000 kPa
Steering
Maximum Flow - Steering Pump 22 gal/min / 82 l/min
Maximum Working Pressure - Steering Pump 3263 psi / 22500 kPa
Number of Steering Wheel Turns - Full Left to Full Right or Full Right to Full Left 3.75 turns
Steering Articulation Angle - Each Direction 40 °
Steering Cycle Times - Full Left to Full Right - At 2,350 rpm: 90 rpm Steering Wheel Speed 2.8 s
Tires
Note (1) Other tire choices are available. Contact your Cat dealer for details.
Note (2) In certain applications, the loader's productive capabilities may exceed the tire's tonnes-km/h (ton-mph) capabilities.
Note (3) Caterpillar recommends that you consult a tire supplier to evaluate all conditions before selecting a tire model.
Other Choices Include 17.5-25 12PR L2; 17.5-R25 XHA * L3; 17.5-R25 * L2/L3 PC RM; 17.5-25 16PR L3, 3PC Rim; 17.5-25 GY L2/L3; 17.5-25 12PR L2, SNOW; Flexport�
Standard Size 17.5-25 12PR
Transmission
Forward and Reverse - High Range 25 mile/h / 40 km/h
Forward and Reverse - Low Range, Speed Range 1* 6.3 mile/h / 10 km/h
Forward and Reverse - Low Range, Speed Range 2* 12.5 mile/h / 20 km/h
Note *Creeper Control allows speed control from a stand still up to 10 km/h (6.3 mph). The Creeper Control will only work in Range 1.
Contact Us
x

We're here to help

We'll do our best to get back to you as soon as possible.