325 - Tier 4 / Stage V | Heavy Equipment

Specifications
Equipment
Related Products

Engine
Net Power - ISO 9249	172 HP / 128.5 kW
Net Power - ISO 9249 (DIN)	175 hp (metric)
Engine Model	Cat C4.4
Engine Power - ISO 14396	174 HP / 129.4 kW
Engine Power - ISO 14396 (DIN)	176 hp (metric)
Bore	4 in / 105 mm
Stroke	5 in / 127 mm
Displacement	269 in³ / 4.4 l
Biodiesel Capability	Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Hydraulic System
Main System - Maximum Flow - Implement	429 L/min (113 gal/min)
Maximum Pressure - Equipment - Normal	5075 psi / 35000 kPa
Maximum Pressure - Equipment - Lift Mode	5510 psi / 38000 kPa
Maximum Pressure - Travel	5075 psi / 35000 kPa
Maximum Pressure - Swing	3988 psi / 27500 kPa

Swing Mechanism
Swing Speed	11.12 r/min
Maximum Swing Torque	60360 ft·lbf / 82 kN·m

Weights
Operating Weight	62800 lb / 28500 kg
Note	Long undercarriage, Reach boom, R2.9B1 (9'6") stick, Heavy Duty (HD) 1.19 m³ (1.56 yd³) bucket, 790 mm (31") HD triple grouser shoes and 8300 kg (18,300 lb) counterweight.

Service Refill Capacities
Fuel Tank Capacity	82.7 gal (US) / 313 l
Cooling System	3.1 gal (US) / 11.8 l
Engine Oil	4 gal (US) / 15 l
Swing Drive	1.5 gal (US) / 5.5 l
Final Drive - Each	1.2 gal (US) / 4.5 l
Hydraulic System - Including Tank	60.8 gal (US) / 230 l
Hydraulic Tank	29.4 gal (US) / 111 l
DEF Tank	6.9 gal (US) / 26 l

Dimensions
Boom	Reach 5.7 m (18'8")
Stick	Reach 2.9 m (9'6")
Bucket	HD 1.19 m³ (1.56 yd³)
Shipping Height - Top of Cab	10.1 ft / 3080 mm
Handrail Height	10.5 ft / 3190 mm
Shipping Length	29.2 ft / 8890 mm
Tail Swing Radius	5.11 ft / 1810 mm
Counterweight Clearance	3.3 ft / 980 mm
Ground Clearance	1.5 ft / 440 mm
Length to Center of Rollers	12 ft / 3650 mm
Track Length	14.7 ft / 4460 mm
Track Gauge	7.1 ft / 2380 mm
Transport Width - 600 mm (24”) Shoes	9.8 ft / 2980 mm
Transport Width - 790 mm (31 in) Shoes	10.4 ft / 3170 mm

Working Ranges & Forces
Maximum Digging Depth	22 ft / 6700 mm
Boom	Reach 5.7 m (18'8")
Stick	Reach 2.9 m (9'6")
Bucket	HD 1.19 m³ (1.56 yd³)
Maximum Reach at Ground Level	32.1 ft / 9780 mm
Maximum Cutting Height	36 ft / 10970 mm
Maximum Loading Height	25.11 ft / 7900 mm
Minimum Loading Height	9.9 ft / 2980 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	21.5 ft / 6520 mm
Maximum Vertical Wall Digging Depth	16 ft / 4880 mm
Bucket Digging Force - ISO	33720 lbf / 150 kN
Stick Digging Force - ISO	23830 lbf / 106 kN

Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg (1.8 lb) of refrigerant which has a CO2 equivalent of 1.144 metric tonnes (1.261 tons).

Sustainability
Recyclability	98%

Standard Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
CAB
- ROPS
- Mechanical-suspension seat (Comfort only)
- Heated air-suspension seat (Deluxe only)
- Heated and ventilated air-suspension seat (Premium only)
- High-resolution 203 mm (8 in) LCD touchscreen monitor (Comfort only)
- High-resolution 254 mm (10 in) LCD touchscreen monitor (Deluxe, Premium only)
CAT TECHNOLOGIES
- VisionLink®
- Remote Flash
- Remote Troubleshoot
- Cat Grade 2D
- Cat Assist
- Cat Payload
ELECTRICAL SYSTEM
- Two 1,000 CCA maintenance free batteries
- Programmable time-delay LED working lights
- LED chassis light, left-hand/right-hand boom lights, cab lights
ENGINE
- Three selectable modes: Power, Smart, Eco
- One-touch low idle with auto engine speed control
- Auto engine idle shutdown
- 50° C (122° F) high-ambient cooling capacity without de-rate
- –18° C (0° F) cold start capability
- Double element air filter with integrated precleaner
- Reversing electric cooling fans
HYDRAULIC SYSTEM
- Boom and stick regeneration circuits
- Auto hydraulic warm up
- Auto two-speed travel
- Boom and stick drift reduction valve
- Auto dig boost
SAFETY AND SECURITY
- 2D E-Fence
- Auto hammer stop
- Rearview camera
- Right-side-view camera
- Lift assist
- Ground-level engine shutoff switch
- Lockable disconnect switch
- Right-hand handrail and hand hold
- Signaling/warning horn
SERVICE AND MAINTENANCE
- Scheduled Oil Sampling (S·O·S?) ports
- Ground-level and platform-level engine oil dipsticks
- Integrated vehicle health management system
UNDERCARRIAGE AND STRUCTURES
- Long undercarriage
- Tie-down points on base frame

Optional Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOMS AND STICKS
- 5.7 m (18'8") Reach boom
- 5.7 m (18'8") HD Reach boom
- 2.8 m + 3.3 m (9'2" + 10'10") VA boom
- 2.9 m (9'6") Reach stick
- 2.9 m (9'6") HD Reach stick
- 2.9 m (9'6") Thumb Ready stick
CAB
- Roller rear sunscreen
- Cat Stick Steer
CAT TECHNOLOGIES
- VisionLink Productivity
- Cat Grade Connectivity
- Cat Grade 2D with Attachment Ready Option (ARO)
- Cat Grade 3D single GNSS
- Cat Grade 3D dual GNSS
- Cat Tilt Rotator (TRS) Integration
- Operator Coaching
ELECTRICAL SYSTEM
- 360° lighting
ENGINE
- –32° C (–25° F) cold start capability
HYDRAULIC SYSTEM
- SmartBoom™ (Europe only)
- Hydraulic efficiency monitoring
SAFETY AND SECURITY
- Cat Command remote control
- 360° visibility
- Swing alarm
- Inspection lighting
UNDERCARRIAGE AND STRUCTURES
- Standard undercarriage (Japan only)
- 600 mm (24") triple grouser shoes
- 600 mm (24") HD triple grouser shoes
- 700 mm (28") triple grouser shoes
- 700 mm (28") HD triple grouser shoes
- 790 mm (31") triple grouser shoes
- 790 mm (31") HD triple grouser shoes
- 4900 kg (10,800 lb) counterweight
- 6700 kg (14,771 lb) counterweight
- 8300 kg (18,300 lb) counterweight
- 2980 mm (9'9") blade
- 3170 mm (10'5") blade

Grade

<p>Cat® Grade technologies combine digital design data, in-cab guidance, and automatic controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.</p><p>Whether you're working on simple planes and slopes or complex contour designs, Grade technologies enable you to boost grading efficiency by as much as 50%, helping you get more work done – in less time and at a lower cost – than ever before.</p>

Model
Cat Grade with 2D for Excavators
Cat Grade with 3D for Excavators

Detect

On the surface, operators in the cabs of large mining equipment often cannot see if another machine or vehicle is too close for safe operation. Detect helps alleviate this potential safety hazard and can also be configured to provide valuable information about site conditions and other assets working in the area. Underground, continuous equipment movement on a longwall face can pose risks to those in the working area.

Model
Cat 2D E-fence for Excavators

Command

Combining the Fleet, Terrain, Detect and Health capabilities of Cat® MineStar™ System, Command enables you to implement remote control, semi-autonomous or fully autonomous mining equipment systems - offering unprecedented improvements in operator safety, equipment availability and site productivity.

Model
Cat Command Remote Control for Construction

Equipment Management

Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.

Model
VisionLink®
Cat Inspect
Cat Product Link

Payload

Cat® Payload technologies provide on-the-go load weighing to assist operators with hitting precise load targets every time, helping to reduce load times, optimize loading efficiency and increase jobsite productivity. Operators can track daily productivity from the cab, with quick access to information such as truck target weights, loads and cycle counts, material movement and daily totals. When combined with Cat Link technologies, detailed data can be accessed remotely to manage overall operations and keep production targets on track.

Model
Cat Payload for Excavators

GC Hammers

Cat ® hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.

Model	Impact Energy Class	Blows per Minute	Maximum Operating Weight
H120 GC S	2950 ft-lb / 4000 J	400-800	3927 lb / 1785 kg
H130 GC S	4425 ft-lb / 6000 J	350-700	5471.4 lb / 2487 kg

Performance Hammers

Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs. Cat Hammers are high performance breakers, designed to help you get the most from your Cat excavators.

Model	Impact Energy Class	Blows per Minute
H115 S	3000 ft·lbf / 4067 J	370-800
H120 S	3500 ft·lbf / 4745 J	350-620
H130 S	4500 ft·lbf / 6101 J	320-600

Primary Pulverizers

Productive demolition and maximum up time with one point of support for your entire system.

Model	Cycle Time - Open	Cycle Time - Close	Crushing Force - Primary Cutter
P318 Primary Pulverizer	1.6 s	1 s	308 Sh Ton / 2740 kN

Multi-Processor with Demolition Jaws

Used to reduce any strength concrete, with and without rebar.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP318 Demolition Jaw	1.6 s	18 tons	1 s

Multi-Processor with Universal Jaws

Used for precision demolition, sectioning concrete and down-sizing concrete for crushers.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP318 Universal Jaw	1.6 s	18 tons	1 s

Multi-Processor with Pulverizer Jaws

Used to completely separate rebar from concrete and reduce concrete to the smallest size; also has great picking capability.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP318 Pulverizer Jaw	1.6 s	18 tons	1 s

Assist

On-board Cat® Technology gives you the edge. Operators of all experience levels will dig, load, and grade with more confidence, speed, and accuracy. The result? Better productivity and lower costs.

Model
Cat Grade Assist for Excavators
Cat Lift Assist for Excavators

Productivity

VisionLink® Productivity is a cloud-based application that is scalable to any size operation. Detailed Cat Production Measurement data, machine data and jobsite data are transmitted from the onboard Cat Product Link™ device directly to the web platform, for you to access wherever you are, via your mobile, tablet or desktop device.

Model
VisionLink® Productivity
Operator Coaching for Excavators

Technology Kits

Caterpillar provides solutions to help customers in any industry improve efficiency and enhance safety.

Model
Cat® Grade Connectivity for Grade with 3D

Vibratory Plate Compactors

Vibratory action and dynamic force provides excellent compaction in a compact size.

Model	Impulse Force	Cycles/Minimum	Base Plate Width
CVP75	16508 lb / 74 kN	2200	29 in / 737 mm
CVP110	24669 lb / 110 kN	2200	34 in / 864 mm

Multi-Processor with Shear Jaws

Used to reduce angle iron, channel iron, beams, pipe, rebar, cable and tires.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP318 Shear Jaw	1.6 s	18 tons	1 s

325 - Tier 4 / Stage V