330 GC - Tier 4 / Stage V

Net Power - ISO 9249: 201 hp / 150 kW
Operating Weight: 68100 lb / 30900 kg
Maximum Digging Depth: 23.8 ft / 7260 mm

The Cat® 330 GC offers you the ideal balance of dependable performance operator productivity features, and reduced costs. The Cat 330 GC is a smart choice for operations where high reliability and low-cost-per-hour performance are priorities.

Loan Calculator Credit Application

Build & Quote

330 GC (07H) Hydraulic Excavator - Product Brochure (Chile, Colombia, Europe, Japan, Korea, N Am, Tu¨rkiye) 330 GC (07H) Hydraulic Excavator - Technical Specifications (Korea) 330 GC (07H) Hydraulic Excavator - Technical Specifications (Chile, Colombia, Türkiye) 330 GC (07H) Hydraulic Excavator - Technical Specifications (Europe) 330 GC (07H) Hydraulic Excavator - Technical Specifications (N Am) 330 GC Hydraulic Excavator - Technical Specifications (Japan)

Specifications
Equipment
Related Products

Engine
Net Power - ISO 9249	201 hp / 150 kW
Net Power - ISO 9249 (DIN)	204 hp (metric)
Engine Model	Cat® C7.1
Engine Power - ISO 14396:2002	202 hp / 151 kW
Engine Power - ISO 14396 (DIN)	205 hp (metric)
Bore	4 in / 105 mm
Stroke	5 in / 135 mm
Displacement	428 in³ / 7.01 l
Biodiesel Capability	Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system, and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Hydraulic System
Main System - Maximum Flow	560 L/min (148 gal/min)
Maximum Pressure - Equipment	5075 psi / 35000 kPa
Maximum Pressure - Travel	5075 psi / 35000 kPa
Maximum Pressure - Swing	4120 psi / 28400 kPa

Swing Mechanism
Swing Speed	11.5 r/min
Note (1)	For CE-marked machine default value may be set lower.
Maximum Swing Torque	77370 lbf·ft / 105 kN·m

Weights
Operating Weight	68100 lb / 30900 kg
Note	Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.54 m³ (2.01 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight.

Service Refill Capacities
Fuel Tank Capacity	125.2 gal (US) / 474 l
Cooling System	6.6 gal (US) / 25 l
Engine Oil	6.6 gal (US) / 25 l
Swing Drive - Each	2.6 gal (US) / 10 l
Final Drive - Each	1.5 gal (US) / 5.5 l
Hydraulic System - Including Tank	81.9 gal (US) / 310 l
Hydraulic Tank	38.8 gal (US) / 147 l
DEF Tank	10.8 gal (US) / 41 l

Dimensions
Boom	Reach 6.15 m (20'2")
Stick	Reach 3.2 m (10'6")
Bucket	HD 1.54 m³ (2.01 yd³)
Shipping Height - Top of Cab	10 ft / 3050 mm
Handrail Height	10 ft / 3050 mm
Shipping Length	34.2 ft / 10420 mm
Tail Swing Radius	10.3 ft / 3130 mm
Counterweight Clearance	3.7 ft / 1110 mm
Ground Clearance	1.6 ft / 490 mm
Track Length	15.11 ft / 4860 mm
Length to Center of Rollers	13.1 ft / 3990 mm
Track Gauge	8.6 ft / 2590 mm
Transport Width	10.5 ft / 3190 mm

Working Ranges and Forces
Maximum Digging Depth	23.8 ft / 7260 mm
Boom	Reach 6.15 m (20'2")
Stick	Reach 3.2 m (10'6")
Bucket	HD 1.54 m³ (2.01 yd³)
Maximum Reach at Ground Level	35.1 ft / 10690 mm
Maximum Cutting Height	32.9 ft / 10020 mm
Maximum Loading Height	22.8 ft / 6930 mm
Minimum Loading Height	7.5 ft / 2280 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	23.3 ft / 7100 mm
Maximum Vertical Wall Digging Depth	19.8 ft / 6030 mm
Bucket Digging Force - ISO	40200 lbf / 179 kN
Stick Digging Force - ISO	28300 lbf / 126 kN

Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).

Sustainability
Recyclability	97%

Standard Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
CAB
- Rollover Protective Structure (ROPS)
- Mechanical-suspension seat (All regions except Europe, North America; optional Japan)
- Air-suspension seat (Europe, North America only; optional Japan)
- High-resolution 203 mm (8 in) LCD touchscreen monitor
CAT TECHNOLOGY
- VisionLink®
- Remote Flash
ELECTRICAL SYSTEM
- Two 1,000 CCA maintenance free batteries
- Programmable time-delay LED working lights
- LED chassis light, left-hand/right-hand boom lights, cab lights
ENGINE
- Cat C7.1 single turbo diesel engine
- Two selectable power modes
- Auto engine speed control
- Auto engine idle shutdown
- 52°C (125°F) high-ambient cooling capacity with de-rate
- Double element air filter with integrated precleaner
- Reversing electric cooling fans
HYDRAULIC SYSTEM
- Boom and stick regeneration circuits
- Auto warm up
- Auto two-speed travel
- Boom and stick drift reduction valve
SAFETY AND SECURITY
- Auto hammer stop
- Rearview camera
- Right-hand-sideview camera
- Ground-level engine shutoff switch
- Lockable disconnect switch
- Right-hand handrail and handhold
- Signaling/warning horn
SERVICE AND MAINTENANCE
- Scheduled Oil Sampling (S·O·S?) ports
- Ground-level and platform-level engine oil dipsticks
- Integrated vehicle health management system
UNDERCARRIAGE AND STRUCTURES
- Tie-down points on base frame
- 6700 kg (14,770 lb) counterweight (All regions except Japan; optional Chile, Colombia)
- 5800 kg (12,790 lb) counterweight (Japan only; optional Chile, Colombia)

Optional Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOMS AND STICKS
- 6.15 m (20'2") Reach boom
- 5.55 m (18'2") Mass boom
- 3.75 m (12'4") Reach stick
- 3.2 m (10'6") Reach stick
- 2.65 m (8'8") Reach stick
- 2.5 m (8'2") Mass stick
CAB
- Operator Protective Guards (OPG)
CAT TECHNOLOGY
- VisionLink Productivity
ENGINE
- -32°C (-25°F) cold start capability
HYDRAULIC SYSTEM
- Boom and stick lowering check valves
- SmartBoom™ (Europe only)
- Hammer return filter circuit
- Tool Control (two pump, one/two way high-pressure flow)
- Medium-pressure circuit
- Quick coupler circuit
SAFETY AND SECURITY
- Swing alarm
- Inspection lighting
SERVICE AND MAINTENANCE
- Electric refueling pump with auto shutoff
UNDERCARRIAGE AND STRUCTURES
- Long narrow undercarriage
- 600 mm (24") triple grouser shoes
- 600 mm (24") HD triple grouser shoes
- 700 mm (28") HD triple grouser shoes
- 800 mm (31") triple grouser shoes
- 900 mm (35") triple grouser shoes

Equipment Management

Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.

Model
VisionLink®

GC Hammers

Cat® hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.

Model	Blows per Minute	Minimum Operating Weight	Rated Flow - Minimum
H130 GC S	350 to 700	5503 lb / 2496 kg	42 gal/min / 160 l/min
H160 GC S	200 to 450	6688 lb / 3034 kg	50 gal/min / 190 l/min

Performance Hammers

Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs. Cat Hammers are high performance breakers, designed to help you get the most from your Cat excavators.

Model	Blows per Minute	Minimum Operating Weight	Rated Flow - Minimum
H120 S	350 to 620	3256 lb / 1480 kg	26 gal/min / 100 l/min
H130 S	320 to 600	3850 lb / 1750 kg	32 gal/min / 120 l/min
H140 S	325 to 540	5302 lb / 2410 kg	42 gal/min / 160 l/min
H160 S	400 to 505	7106 lb / 3230 kg	58 gal/min / 220 l/min

Secondary Pulverizer

Non-rotating hydraulic pulverizer reduces concrete and separates rebar.

Model	Cycle Time - Open	Cycle Time - Close	Crushing Force - Primary Cutter
P224 Secondary Pulverizer	1.9 s	1.3 s	409 Sh Ton / 3640 kN
P232 Secondary Pulverizer	1.9 s	1.4 s	479 Sh Ton / 4265 kN

Primary Pulverizers

Productive demolition and maximum up time with one point of support for your entire system.

Model	Cycle Time - Open	Cycle Time - Close	Crushing Force - Primary Cutter
P324 Primary Pulverizer	1.8 s	1.2 s	446 Sh Ton / 3965 kN
P332 Primary Pulverizer	1.9 s	1.3 s	563 Sh Ton / 5010 kN

Multi-Processor with Demolition Jaws

Used to reduce any strength concrete, with and without rebar.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Demolition Jaw	1.8 s	24 tons	1.2 s
MP332 Demolition Jaw	1.9 s	32 tons	1.3 s

Multi-Processor with Universal Jaws

Used for precision demolition, sectioning concrete and down-sizing concrete for crushers.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Universal Jaw	1.6 s	24 tons	1 s
MP332 Universal Jaw	1.6 s	32 tons	1 s

Multi-Processor with Pulverizer Jaws

Used to completely separate rebar from concrete and reduce concrete to the smallest size; also has great picking capability.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Pulverizer Jaw	1.8 s	24 tons	1.2 s
MP332 Pulverizer Jaw	1.9 s	32 tons	1.3 s

Productivity

VisionLink® Productivity is a cloud-based application that is scalable to any size operation. Detailed Cat Production Measurement data, machine data and jobsite data are transmitted from the onboard Cat Product Link™ device directly to the web platform, for you to access wherever you are, via your mobile, tablet or desktop device.

Model
VisionLink® Productivity

Vibratory Plate Compactors

Vibratory action and dynamic force provides excellent compaction in a compact size.

Model	Impulse Force	Cycles/Minimum	Base Plate Width
CVP110	24669 lb / 110 kN	2200	34 in / 864 mm

Multi-Processor with Concrete Cutter Jaws

For demolition and cutting of concrete structures.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Concrete Cutter Jaw	1.8 s	24 tons	1.2 s
MP332 Concrete Cutter Jaw	1.9 s	32 tons	1.3 s

Multi-Processor with Shear Jaws

Used to reduce angle iron, channel iron, beams, pipe, rebar, cable and tires.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Shear Jaw	1.8 s	24 tons	1.2 s
MP332 Shear Jaw	1.9 s	32 tons	1.3 s

Multi-Processor with Tank Shear Jaws

Used to cut storage tanks and plate steel producing straight, smooth cuts.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Tank Shear	1.8 s	24 tons	1.2 s
MP332 Tank Shear	1.9 s	32 tons	1.3 s