330 - Tier 4 / Stage V | Heavy Equipment

Specifications
Equipment
Related Products

Engine
Net Power - ISO 9249	273 HP / 203.7 kW
Net Power - ISO 9249 (DIN)	277 hp (metric)
Engine Model	Cat C7.1
Engine Power - ISO 14396	275 HP / 205 kW
Engine Power - ISO 14396 (DIN)	279 hp (metric)
Bore	4 in / 105 mm
Stroke	5 in / 135 mm
Displacement	428 in³ / 7.01 l
Biodiesel Capability	Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014 emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels.Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Hydraulic System
Main System - Maximum Flow	560 l/min (148 gal/min)
Maximum Pressure - Equipment	5075 psi / 35000 kPa
Maximum Pressure - Equipment - Lift Mode	5510 psi / 38000 kPa
Maximum Pressure - Travel	5075 psi / 35000 kPa
Maximum Pressure - Swing	4320 psi / 29800 kPa

Swing Mechanism
Swing Speed	11.5 r/min
Maximum Swing Torque	81132 lb/ft / 110 kN·m

Weights
Operating Weight	69200 lb / 31400 kg
Note	Long undercarriage, Reach boom, R3.2 m (10'6") stick, Heavy Duty (HD) 1.76 m³ (2.30 yd³) bucket, 800 mm (31") triple grouser shoes and 6700 kg (14,770 lb) counterweight.

Service Refill Capacities
Fuel Tank Capacity	125.2 gal (US) / 474 l
Cooling System	6.6 gal (US) / 25 l
Engine Oil	6.6 gal (US) / 25 l
Swing Drive	2.6 gal (US) / 10 l
Final Drive - Each	1.5 gal (US) / 5.5 l
Hydraulic System - Including Tank	81.9 gal (US) / 310 l
Hydraulic Tank	38.8 gal (US) / 147 l
DEF Tank	10.8 gal (US) / 41 l

Dimensions
Boom	Reach 6.15 m (20'2")
Stick	Reach 3.2 m (10'6")
Bucket	HD 1.76 m³ (2.30 yd³)
Shipping Height - Top of Cab	10 ft / 3060 mm
Handrail Height	10 ft / 3060 mm
Shipping Length	34.2 ft / 10420 mm
Tail Swing Radius	10.3 ft / 3130 mm
Counterweight Clearance	3.7 ft / 1120 mm
Ground Clearance	1.6 ft / 490 mm
Track Length	15.9 ft / 4860 mm
Length to Center of Rollers	13.1 ft / 3990 mm
Track Gauge	8.5 ft / 2590 mm
Transport Width	11.1 ft / 3390 mm

Working Ranges & Forces
Maximum Digging Depth	23.9 ft / 7240 mm
Boom	Reach 6.15 m (20'2")
Stick	Reach 3.2 m (10'6")
Bucket	HD 1.76 m³ (2.30 yd³)
Maximum Reach at Ground Level	35 ft / 10680 mm
Maximum Cutting Height	32.9 ft / 10030 mm
Maximum Loading Height	22.8 ft / 6950 mm
Minimum Loading Height	7.5 ft / 2300 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	23.3 ft / 7090 mm
Maximum Vertical Wall Digging Depth	19.7 ft / 6010 mm
Bucket Digging Force - ISO	40200 lbf / 179 kN
Stick Digging Force - ISO	28300 lbf / 126 kN

Air Conditioning System
Air Conditioning	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg (1.9 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).

Sustainability
Recyclability	97%

Standard Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
CAB
- Rollover protective structure (ROPS)
- Mechanical-suspension seat (Comfort only)
- Heated air-suspension seat (Deluxe only)
- Heated and ventilated air-suspension seat (Premium, Demolition only)
- High-resolution 203 mm (8 in) LCD touchscreen monitor (Comfort only)
- High-resolution 254 mm (10 in) LCD touchscreen monitor (Deluxe, Premium, Demolition only)
CAT TECHNOLOGY
- VisionLink®
- Remote Flash
- Remote Troubleshoot
- Cat Grade 2D
- Cat Assist
ELECTRICAL SYSTEM
- Two 1,000 CCA maintenance free batteries
- Programmable time-delay LED working lights
- LED chassis light, left-hand/right-hand boom lights, cab lights
ENGINE
- Cat C7.1 twin turbo diesel engine
- Three selectable power modes
- Auto engine speed control
- Auto engine idle shutdown
- 50°C (122°F) high-ambient cooling capacity with de-rate
- -18°C (-0°F) cold start capability
- Double element air filter with integrated precleaner
- Reversing electric cooling fans
HYDRAULIC SYSTEM
- Boom and stick regeneration circuits
- Auto warm up
- Auto two-speed travel
- Auto Heavy Lift
- Auto Dig Boost
- Boom and stick drift reduction valve
SAFETY AND SECURITY
- 2D E-Fence
- Auto hammer stop
- Rearview camera
- Right-side-view camera
- Ground-level engine shutoff switch
- Lockable disconnect switch
- Right-hand handrail and hand hold
- Signaling/warning horn
SERVICE AND MAINTENANCE
- Scheduled Oil Sampling (S·O·S?) ports
- Ground-level and platform-level engine oil dipsticks
- Integrated vehicle health management system
UNDERCARRIAGE AND STRUCTURES
- Tie-down points on base frame
- 6700 kg (14,770 lb) counterweight

Optional Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOMS AND STICKS
- 5.55 m (18'2") Mass boom
- 6.15 m (20'2") Reach boom
- 6.15 m (20'2") HD Reach boom
- 6.5 m (21'3") Straight boom
- 10.2 m (33'6") Super Long Reach boom
- 3.0 m (10'") Stub + 3.3 m (10'10") Fore, Variable Angle boom
- 2.5 m (8'2") Mass stick
- 2.65 m (8'8") Reach stick
- 2.65 m (8'8") HD Reach stick
- 3.2 m (10'6") Reach stick
- 3.2 m (10'6") HD Reach stick
- 3.75 m (12'2") Reach stick
- 7.85 m (25'9") Super Long Reach stick
CAB
- Cat Stick Steer
- Auxiliary relay
CAT TECHNOLOGY
- VisionLink Productivity
- Cat Grade Connectivity
- Cat Grade 2D with Attachment Ready Option (ARO)
- Cat Grade 3D single GNSS
- Cat Grade 3D dual GNSS
- Cat Tilt Rotator (TRS) Integration
- Operator Coaching
ENGINE
- -32°C (-25°F) cold start capability
HYDRAULIC SYSTEM
- Boom and stick lowering check valves
- Hammer return filter circuit
- Tool Control (two pump, one/two way high-pressure flow)
- Medium-pressure circuit
- Hydraulic efficiency monitoring
- Quick coupler circuit
- SmartBoom™ (Europe only)
SAFETY AND SECURITY
- Cat Command (remote control)
- 360° visibility
- Swing alarm
- Inspection lighting
SERVICE AND MAINTENANCE
- Electric refueling pump with auto shutoff
UNDERCARRIAGE AND STRUCTURES
- 600 mm (24") triple grouser shoes
- 600 mm (24") HD triple grouser shoes
- 600 mm (24") double grouser shoes
- 600 mm (24") single grouser shoes
- 700 mm (28") triple grouser shoes
- 800 mm (31") triple grouser shoes
- 900 mm (34") triple grouser shoes

Grade

<p>Cat® Grade technologies combine digital design data, in-cab guidance, and automatic controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.</p><p>Whether you're working on simple planes and slopes or complex contour designs, Grade technologies enable you to boost grading efficiency by as much as 50%, helping you get more work done – in less time and at a lower cost – than ever before.</p>

Model
Cat Grade with 2D for Excavators
Cat Grade with 3D for Excavators

Detect

On the surface, operators in the cabs of large mining equipment often cannot see if another machine or vehicle is too close for safe operation. Detect helps alleviate this potential safety hazard and can also be configured to provide valuable information about site conditions and other assets working in the area. Underground, continuous equipment movement on a longwall face can pose risks to those in the working area.

Model
Cat 2D E-fence for Excavators

Command

Combining the Fleet, Terrain, Detect and Health capabilities of Cat® MineStar™ System, Command enables you to implement remote control, semi-autonomous or fully autonomous mining equipment systems - offering unprecedented improvements in operator safety, equipment availability and site productivity.

Model
Cat Command Remote Control for Construction
Cat Command for Excavating

Equipment Management

Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.

Model
VisionLink®
Cat Inspect
Cat Product Link
Cat Remote Troubleshooting

Payload

Cat® Payload technologies provide on-the-go load weighing to assist operators with hitting precise load targets every time, helping to reduce load times, optimize loading efficiency and increase jobsite productivity. Operators can track daily productivity from the cab, with quick access to information such as truck target weights, loads and cycle counts, material movement and daily totals. When combined with Cat Link technologies, detailed data can be accessed remotely to manage overall operations and keep production targets on track.

Model
Cat Payload for Excavators

GC Hammers

Cat ® hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.

Model	Impact Energy Class	Blows per Minute	Maximum Operating Weight
H130 GC S	4425 ft-lb / 6000 J	350-700	5471.4 lb / 2487 kg
H160 GC S	7500 ft-lb / 10170 J	200-450	5471.4 lb / 2487 kg

Performance Hammers

Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs. Cat Hammers are high performance breakers, designed to help you get the most from your Cat excavators.

Model	Impact Energy Class	Blows per Minute
H120 S	3500 ft·lbf / 4745 J	350-620
H130 S	4500 ft·lbf / 6101 J	320-600
H140 S	6000 ft·lbf / 8135 J	325-540

Secondary Pulverizer

Non-rotating hydraulic pulverizer reduces concrete and separates rebar.

Model	Cycle Time - Open	Cycle Time - Close	Crushing Force - Primary Cutter
P224 Secondary Pulverizer	1.9 s	1.3 s	409 Sh Ton / 3640 kN
P232 Secondary Pulverizer	1.9 s	1.4 s	479 Sh Ton / 4265 kN

Primary Pulverizers

Productive demolition and maximum up time with one point of support for your entire system.

Model	Cycle Time - Open	Cycle Time - Close	Crushing Force - Primary Cutter
P324 Primary Pulverizer	1.8 s	1.2 s	446 Sh Ton / 3965 kN
P332 Primary Pulverizer	1.9 s	1.3 s	563 Sh Ton / 5010 kN

Multi-Processor with Demolition Jaws

Used to reduce any strength concrete, with and without rebar.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Demolition Jaw	1.8 s	24 tons	1.2 s
MP332 Demolition Jaw	1.9 s	32 tons	1.3 s

Multi-Processor with Universal Jaws

Used for precision demolition, sectioning concrete and down-sizing concrete for crushers.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Universal Jaw	1.6 s	24 tons	1 s
MP332 Universal Jaw	1.6 s	32 tons	1 s

Multi-Processor with Pulverizer Jaws

Used to completely separate rebar from concrete and reduce concrete to the smallest size; also has great picking capability.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Pulverizer Jaw	1.8 s	24 tons	1.2 s
MP332 Pulverizer Jaw	1.9 s	32 tons	1.3 s

Assist

On-board Cat® Technology gives you the edge. Operators of all experience levels will dig, load, and grade with more confidence, speed, and accuracy. The result? Better productivity and lower costs.

Model
Cat Grade Assist for Excavators
Cat Lift Assist for Excavators

Productivity

VisionLink® Productivity is a cloud-based application that is scalable to any size operation. Detailed Cat Production Measurement data, machine data and jobsite data are transmitted from the onboard Cat Product Link™ device directly to the web platform, for you to access wherever you are, via your mobile, tablet or desktop device.

Model
VisionLink® Productivity
Operator Coaching for Excavators

Technology Kits

Caterpillar provides solutions to help customers in any industry improve efficiency and enhance safety.

Model
Cat® Grade Connectivity for Grade with 3D

Vibratory Plate Compactors

Vibratory action and dynamic force provides excellent compaction in a compact size.

Model	Impulse Force	Cycles/Minimum	Base Plate Width
CVP110	24669 lb / 110 kN	2200	34 in / 864 mm

Multi-Processor with Concrete Cutter Jaws

For demolition and cutting of concrete structures.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Concrete Cutter Jaw	1.8 s	24 tons	1.2 s
MP332 Concrete Cutter Jaw	1.9 s	32 tons	1.3 s

Multi-Processor with Shear Jaws

Used to reduce angle iron, channel iron, beams, pipe, rebar, cable and tires.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Shear Jaw	1.8 s	24 tons	1.2 s
MP332 Shear Jaw	1.9 s	32 tons	1.3 s

Multi-Processor with Tank Shear Jaws

Used to cut storage tanks and plate steel producing straight, smooth cuts.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Tank Shear	1.8 s	24 tons	1.2 s
MP332 Tank Shear	1.9 s	32 tons	1.3 s

330 - Tier 4 / Stage V