326 - Tier 4 / Stage V | Heavy Equipment

Specifications
Equipment
Related Products

Engine
Net Power - ISO 9249	201 HP / 149.8 kW
Net Power - ISO 9249 (DIN)	204 hp (metric)
Engine Model	Cat C7.1
Engine Power - ISO 14396	202 HP / 151 kW
Engine Power - ISO 14396 (DIN)	205 hp (metric)
Bore	4 in / 105 mm
Stroke	5 in / 135 mm
Displacement	428 in³ / 7.01 l
Biodiesel Capability	Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, and Japan 2014 emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air intake system, exhaust system and alternator with engine speed at 2,200 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations” (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Hydraulic System
Main System - Maximum Flow	481 l/min (127 gal/min)
Maximum Pressure - Equipment	5075 psi / 35000 kPa
Maximum Pressure - Equipment - Lift Mode	5510 psi / 38000 kPa
Maximum Pressure - Travel	5075 psi / 35000 kPa
Maximum Pressure - Swing	4118 psi / 28400 kPa

Swing Mechanism
Swing Speed	9.9 r/min
Maximum Swing Torque	78180 ft·lbf / 106 kN·m

Weights
Operating Weight	56400 lb / 25600 kg
Note	Long undercarriage, Reach boom, R2.95 m (9'7") stick, 1.54 m³ (2.01 yd³) Heavy Duty (HD) bucket, 600 mm (24") triple grouser shoes and 4600 kg (10,140 lb) counterweight.

Service Refill Capacities
Fuel Tank Capacity	125.2 gal (US) / 474 l
Cooling System	6.6 gal (US) / 25 l
Engine Oil	6.6 gal (US) / 25 l
Swing Drive	3 gal (US) / 11.5 l
Final Drive - Each	1.2 gal (US) / 4.5 l
Hydraulic System - Including Tank	81.9 gal (US) / 310 l
Hydraulic Tank	38.8 gal (US) / 147 l
DEF Tank	10.8 gal (US) / 41 l

Dimensions
Boom	Reach 5.9 m (19'4")
Stick	Reach 2.95 m (9'8")
Bucket	HD 1.54 m³ (2.01 yd³)
Shipping Height - Top of Cab	9.8 ft / 3000 mm
Handrail Height	9.8 ft / 3000 mm
Shipping Length	33 ft / 10060 mm
Tail Swing Radius	9.8 ft / 3000 mm
Counterweight Clearance	1.4 ft / 440 mm
Ground Clearance	3.5 ft / 1060 mm
Track Length	15.2 ft / 4640 mm
Length to Center of Rollers	12.6 ft / 3830 mm
Track Gauge	8.5 ft / 2590 mm
Transport Width	10.5 ft / 3190 mm

Working Ranges & Forces
Maximum Digging Depth	22.4 ft / 6820 mm
Boom	Reach 5.9 m (19'4")
Stick	Reach 2.95 m (9'8")
Bucket	HD 1.54 m³ (2.01 yd³)
Maximum Reach at Ground Level	33.2 ft / 10120 mm
Maximum Cutting Height	31.8 ft / 9680 mm
Maximum Loading Height	21.7 ft / 6610 mm
Minimum Loading Height	7.8 ft / 2390 mm
Maximum Depth Cut for 2440 mm (8 ft) Level Bottom	21.8 ft / 6650 mm
Maximum Vertical Wall Digging Depth	17.5 ft / 5340 mm
Bucket Digging Force - ISO	37318 lbf / 166 kN
Stick Digging Force - ISO	27202 lbf / 121 kN

Air Conditioning System
Note (1)	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.85 kg of refrigerant which has a CO2 equivalent of 1.216 metric tonnes.

Sustainability
Recyclability	97%

Standard Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
CAB
- Rollover protective structure (ROPS)
CAT TECHNOLOGIES
- VisionLink®
- Remote Flash
- Remote Troubleshoot
- Cat Grade 2D
- Cat Assist
- Cat Payload
ELECTRICAL SYSTEM
- Maintenance free batteries
- Programmable time-delay LED working lights
- LED chassis light, left-hand/right-hand boom lights, cab lights
ENGINE
- Cat C7.1 single turbo diesel engine
- Three selectable power modes
- One-touch low idle with automatic
- engine speed control
- Auto engine idle shutdown
- 52° C (125° F) high-ambient cooling capacity with de-rate
- –18° C (0° F) cold start capability
- Double element air filter with integrated precleaner
- Reversing electric cooling fans
HYDRAULIC SYSTEM
- Boom and stick regeneration circuits
- Auto hydraulic warm up
- Auto two-speed travel
- Boom and stick drift reduction valve
- Auto dig boost
- Auto heavy lift
- Tandem-type electronic main pump
- Element-type main hydraulic filter
SAFETY AND SECURITY
- 2D E-Fence
- Auto hammer stop
- Rearview camera
- Right-side-view camera
- Lift assist
- Ground-level engine shutoff switch
- Lockable disconnect switch
- Right-hand handrail and hand hold
- Signaling/warning horn
SERVICE AND MAINTENANCE
- Scheduled Oil Sampling (S·O·S?) ports
- Ground-level and platform-level engine oil dipsticks
- Integrated vehicle health management system
UNDERCARRIAGE AND STRUCTURES
- Long undercarriage
- Tie-down points on base frame
- 4600 kg (10,141 lb) counterweight

Optional Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOMS AND STICKS
- 5.9 m (19'4") Reach boom
- 5.9 m (19'4") HD Reach boom
- 2.8 m + 3.3 m (9'2" + 10'10") Variable Angle boom
- 10.2 m (33'6") Super Long Reach boom
- 3.6 m (11'10") Reach stick
- 2.95 m (9'8") Reach stick
- 2.95 m (9'8") HD Reach stick
- 2.5 m (8'2") Reach stick
- 7.85 m (25'9") Super Long Reach stick
CAB
- Mechanical-suspension seat (Comfort only)
- Air-adjustable seat with heat (Deluxe only)
- Auto adjustable seat with heat and air ventilation (Premium only)
- High-resolution 203 mm (8 in) LCD touchscreen monitor
- High-resolution 254 mm (10 in) LCD touchscreen monitor
- Cat Stick Steer
- Auxiliary relay
CAT TECHNOLOGIES
- VisionLink Productivity
- Cat Grade Connectivity
- Cat Grade 2D with Attachment Ready Option (ARO)
- Cat Grade 3D single GNSS
- Cat Grade 3D dual GNSS
- Cat Tilt Rotator (TRS) Integration
- Operator Coaching
ELECTRICAL SYSTEM
- 360° lighting
ENGINE
- –32° C (–25° F) cold start capability
HYDRAULIC SYSTEM
- SmartBoom™ (Europe only)
- Hydraulic efficiency monitoring
SAFETY AND SECURITY
- Cat Command (remote control)
- 360° visibility
- Swing alarm
- Inspection lighting
SERVICE AND MAINTENANCE
- Electric refueling pump with auto shutoff
UNDERCARRIAGE AND STRUCTURES
- Long narrow undercarriage
- 600 mm (24") triple grouser shoes
- 600 mm (24") double grouser shoes
- 600 mm (24") single grouser shoes
- 700 mm (28") triple grouser shoes
- 790 mm (31") triple grouser shoes
- 900 mm (35") triple grouser track shoes
- 7400 kg (16,300 lb) counterweight for Super Long Reach

Grade

<p>Cat® Grade technologies combine digital design data, in-cab guidance, and automatic controls to enhance grading accuracy, reduce rework, and lower costs related to production earthmoving and rough, fine and finish grade applications.</p><p>Whether you're working on simple planes and slopes or complex contour designs, Grade technologies enable you to boost grading efficiency by as much as 50%, helping you get more work done – in less time and at a lower cost – than ever before.</p>

Model
Cat Grade with 2D for Excavators
Cat Grade with 3D for Excavators

Detect

On the surface, operators in the cabs of large mining equipment often cannot see if another machine or vehicle is too close for safe operation. Detect helps alleviate this potential safety hazard and can also be configured to provide valuable information about site conditions and other assets working in the area. Underground, continuous equipment movement on a longwall face can pose risks to those in the working area.

Model
Cat 2D E-fence for Excavators

Command

Combining the Fleet, Terrain, Detect and Health capabilities of Cat® MineStar™ System, Command enables you to implement remote control, semi-autonomous or fully autonomous mining equipment systems - offering unprecedented improvements in operator safety, equipment availability and site productivity.

Model
Cat Command Remote Control for Construction
Cat Command for Excavating

Equipment Management

Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.

Model
VisionLink®
Cat Inspect
Cat Product Link
Cat Remote Troubleshooting

Payload

Cat® Payload technologies provide on-the-go load weighing to assist operators with hitting precise load targets every time, helping to reduce load times, optimize loading efficiency and increase jobsite productivity. Operators can track daily productivity from the cab, with quick access to information such as truck target weights, loads and cycle counts, material movement and daily totals. When combined with Cat Link technologies, detailed data can be accessed remotely to manage overall operations and keep production targets on track.

Model
Cat Payload for Excavators

GC Hammers

Cat ® hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.

Model	Impact Energy Class	Blows per Minute	Maximum Operating Weight
H120 GC S	2950 ft-lb / 4000 J	400-800	3927 lb / 1785 kg
H130 GC S	4425 ft-lb / 6000 J	350-700	5471.4 lb / 2487 kg

Performance Hammers

Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs. Cat Hammers are high performance breakers, designed to help you get the most from your Cat excavators.

Model	Impact Energy Class	Blows per Minute
H120 S	3500 ft·lbf / 4745 J	350-620
H130 S	4500 ft·lbf / 6101 J	320-600
H140 S	6000 ft·lbf / 8135 J	325-540

Secondary Pulverizer

Non-rotating hydraulic pulverizer reduces concrete and separates rebar.

Model	Cycle Time - Open	Cycle Time - Close	Crushing Force - Primary Cutter
P224 Secondary Pulverizer	1.9 s	1.3 s	409 Sh Ton / 3640 kN

Primary Pulverizers

Productive demolition and maximum up time with one point of support for your entire system.

Model	Cycle Time - Open	Cycle Time - Close	Crushing Force - Primary Cutter
P318 Primary Pulverizer	1.6 s	1 s	308 Sh Ton / 2740 kN
P324 Primary Pulverizer	1.8 s	1.2 s	446 Sh Ton / 3965 kN

Multi-Processor with Demolition Jaws

Used to reduce any strength concrete, with and without rebar.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP318 Demolition Jaw	1.6 s	18 tons	1 s
MP324 Demolition Jaw	1.8 s	24 tons	1.2 s

Multi-Processor with Universal Jaws

Used for precision demolition, sectioning concrete and down-sizing concrete for crushers.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP318 Universal Jaw	1.6 s	18 tons	1 s
MP324 Universal Jaw	1.6 s	24 tons	1 s

Multi-Processor with Pulverizer Jaws

Used to completely separate rebar from concrete and reduce concrete to the smallest size; also has great picking capability.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP318 Pulverizer Jaw	1.6 s	18 tons	1 s
MP324 Pulverizer Jaw	1.8 s	24 tons	1.2 s

Assist

On-board Cat® Technology gives you the edge. Operators of all experience levels will dig, load, and grade with more confidence, speed, and accuracy. The result? Better productivity and lower costs.

Model
Cat Grade Assist for Excavators
Cat Lift Assist for Excavators

Productivity

VisionLink® Productivity is a cloud-based application that is scalable to any size operation. Detailed Cat Production Measurement data, machine data and jobsite data are transmitted from the onboard Cat Product Link™ device directly to the web platform, for you to access wherever you are, via your mobile, tablet or desktop device.

Model
VisionLink® Productivity
Operator Coaching for Excavators

Technology Kits

Caterpillar provides solutions to help customers in any industry improve efficiency and enhance safety.

Model
Cat® Grade Connectivity for Grade with 3D

Vibratory Plate Compactors

Vibratory action and dynamic force provides excellent compaction in a compact size.

Model	Impulse Force	Cycles/Minimum	Base Plate Width
CVP110	24669 lb / 110 kN	2200	34 in / 864 mm

Multi-Processor with Concrete Cutter Jaws

For demolition and cutting of concrete structures.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Concrete Cutter Jaw	1.8 s	24 tons	1.2 s

Multi-Processor with Shear Jaws

Used to reduce angle iron, channel iron, beams, pipe, rebar, cable and tires.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP318 Shear Jaw	1.6 s	18 tons	1 s
MP324 Shear Jaw	1.8 s	24 tons	1.2 s

Multi-Processor with Tank Shear Jaws

Used to cut storage tanks and plate steel producing straight, smooth cuts.

Model	Cycle Time - Open	Excavator Minimum	Cycle Time - Close
MP324 Tank Shear	1.8 s	24 tons	1.2 s

326 - Tier 4 / Stage V