M316 - Tier 4 / Stage V

Engine Power - ISO 14396: 148 hp / 110 kW
Operating Weight Maximum: 36990 lb / 16780 kg
Maximum Travel Speed: 21.7 mile/h / 35 km/h

The Cat® M316 Wheel Excavator helps provide top performance with simple-to-use technologies to get the job done fast. With low maintenance costs, long service intervals, and 100 percent daily ground level check, the M316 helps save you time and money. The M316 helps give you the power to work long while putting money in your pocket.

Loan Calculator Credit Application

Build & Quote

M316 (07E) Wheel Excavator - Product Brochure (N Am) M316 (07E) Wheel Excavator - Technical Specifications (N Am)

Specifications
Equipment
Related Products

Engine
Engine Power - ISO 14396	148 hp / 110 kW
Engine Power - ISO 14396 (DIN)	150 hp (metric)
Engine Model	Cat® C4.4
Net Power - ISO 9249	141 hp / 105 kW
Net Power - ISO 9249 (DIN)	143 hp (metric)
Bore	4.1 in / 105 mm
Stroke	5 in / 127 mm
Displacement	268.5 in³ / 4.4 l
Biodiesel Capability	Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final and EU Stage V emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). *Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Drive
Maximum Travel Speed	21.7 mile/h / 35 km/h

Hydraulic System
Main System - Maximum Flow - Implement	73 gal/min / 275 l/min
Maximum Pressure - Implement Circuit - Normal	5076 psi / 35000 kPa
Maximum Pressure - Implement Circuit - Heavy Lift	5366 psi / 37000 kPa
Maximum Pressure - Implement Circuit - Travel Circuit	5076 psi / 35000 kPa

Swing Mechanism
Maximum Swing Speed	10.2 r/min
Maximum Swing Torque	32305 lbf·ft / 43.8 kN·m
Note (1)	*For CE-marked machine default value may be set lower.

Machine Weight
Operating Weight Maximum	36990 lb / 16780 kg
Operating Weight Minimum	36400 lb / 16510 kg
Note (1)	Operating weight includes full fuel tank, operator and 10.00-20 tires. Weight varies depending on configuration.

Service Refill Capacities
Fuel Tank	92.5 gal (US) / 350 l
Diesel Exhaust Fluid (DEF)	5.3 gal (US) / 20 l
Cooling System	6.3 gal (US) / 24 l
Hydraulic Tank	31.7 gal (US) / 120 l
Hydraulic System - Including Tank	68.7 gal (US) / 260 l

Dimensions
Boom	Variable Adjustable Boom 5.2 m (17'1")
Stick	2.5 m (8'2")
Bucket	GD 0.8 m³ (1.05 yd³)
Shipping Height - Top of Cab	11 ft / 3360 mm
Shipping Length	28.6 ft / 8710 mm
Support Point	11.6 ft / 3530 mm
Tail Swing Radius	7.7 ft / 2350 mm
Counterweight Clearance	4.3 ft / 1301 mm
Ground Clearance	1.3 ft / 395 mm
Undercarriage Length	16.3 ft / 4970 mm
Wheel Base	8.4 ft / 2550 mm

Working Ranges and Forces
Boom	Variable Adjustable Boom 5.2 m (17'1")
Stick	2.5 m (8'2")
Bucket	GD 0.8 m³ (1.05 yd³)
Maximum Cutting Height	33.6 ft / 10240 mm
Maximum Loading Height	23.9 ft / 7280 mm
Maximum Digging Depth	19.4 ft / 5920 mm
Maximum Vertical Wall Digging Depth	15.2 ft / 4620 mm
Maximum Reach at Ground Line	30.2 ft / 9220 mm
Stick Forces (ISO)	15512 lbf / 69 kN
Bucket Forces (ISO)	26752 lbf / 119 kN
Note (1)	Range values are with dual pneumatic tires (10.00-20). Range values are calculated with a GD bucket (CW) and CW-30 quick coupler with a tip radius of 1484 mm (4'10"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of 1378 mm (4'6").

Air Conditioning System
Note	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg (1.8 lb) of refrigerant which has a CO2 equivalent of 1.216 metric tonnes (1.340 tons).

Standard Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOM AND STICKS
- 5.2 m (17'1") Variable Adjustable Boom
- 2.5 m (8'2'') stick
ELECTRICAL SYSTEM
- LED lights on boom and cab
- Programmable time-delay LED working lights
- Roading and indicator lights, front and rear
- Maintenance-free batteries
- Centralized electrical disconnect switch
ENGINE
- Cat C4.4 Single Turbo diesel engine
- Power mode selector
- One-touch low idle with automatic engine speed control
- Automatic engine idle shutdown
- 52°C (125°F) high-ambient cooling capacity
- Cold starting capability -18°C (0°F)
- Double element air filter with integrated pre-cleaner
HYDRAULIC SYSTEM
- Boom, stick and bucket drift reduction valves
- Automatic hydraulic oil warm up
- Heavy lift mode
SAFETY AND SECURITY
- Rear and right-side-view cameras
- Wide angle mirrors
- Signal/warning horn
- Lockable disconnect switch
- Anti-skid plate and countersunk bolts on service platform
SERVICE AND MAINTENANCE
- Scheduled Oil Sampling (S·O·S?) ports
- Integrated vehicle health management system
CAT TECHNOLOGY
- VisionLink®
- Remote Flash and Remote Troubleshoot
UNDERCARRIAGE AND STRUCTURES
- All wheel drive
- Automatic brake/axle lock
- 2600 kg (5,732 lb) counterweight
CAB
- Sound-suppressed ROPS cab
- Keyless push-to-start engine control
- Openable two-piece front window (laminated)
- Height-adjustable console, infinite with no tool
- High-resolution 254 mm (10 in) LCD touchscreen monitor

Optional Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
ELECTRICAL SYSTEM
- LED lights on chassis (left-hand, right-hand) and counterweight
- Electrical refueling pump
HYDRAULIC SYSTEM
- Boom and stick lowering check valves
- Bucket cylinder check valves
- Two-slider joysticks
- Joystick steering
SAFETY AND SECURITY
- 360° visibility
- Travel alarm
- Inspection lighting
- 2D E-fence
- Cab Avoidance
SERVICE AND MAINTENANCE
- Automatic lubrication system for implement and swing system
CAT TECHNOLOGY
- Cat Grade with 2D
- Cat Grade with 2D with Attachment Ready Option (ARO)
- Laser catcher
- Cat Grade 3D Ready
- Cat Grade Connectivity
- Cat Grade with Assist
- Cat Payload
- Cat Tiltrotator (TRS) Integration
UNDERCARRIAGE AND STRUCTURES
- 10.00-20 16 PR, dual tires
- 445/70R 19.5, single tires
- 3300 kg (7,280) counterweight
CAB
- Operator Protective Guards (OPG)

Equipment Management

Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.

Model
VisionLink®
Cat Remote Troubleshooting

GC Hammers

Cat® hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.

Model	Blows per Minute	Minimum Operating Weight	Rated Flow - Minimum
H110 GC S	450 to 650	2599 lb / 1179 kg	21 gal/min / 80 l/min
H115 GC S	450 to 800	3098 lb / 1405 kg	24 gal/min / 90 l/min

Performance Hammers

Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs. Cat Hammers are high performance breakers, designed to help you get the most from your Cat excavators.

Model	Blows per Minute	Minimum Operating Weight	Rated Flow - Minimum
H110 S	450 to 1000	2090 lb / 950 kg	16 gal/min / 60 l/min
H115 S	370 to 800	2354 lb / 1070 kg	19 gal/min / 70 l/min
H120 S	350 to 620	3256 lb / 1480 kg	26 gal/min / 100 l/min

Tiltrotators

Helps you get the job done faster with the quality you expect from Cat products. Integrated to your excavator, Tiltrotators are productive, easy-to-use, and add value to your operation. Tiltrotators are a versatile solution providing enhancements to your operation.

Model	Machine Class	Interface Options: Top-Bottom
TRS14 Tiltrotator: 516-6769	14-19 ton Excavators	S60 / S60
TRS14 Tiltrotator: 516-6772	14-19 ton Excavators	Pin-on / S60
TRS14 Tiltrotator: 555-1567	14-19 ton Excavators	Pin-on / S60
TRS14 Tiltrotator: 605-4751	14-19	HCS60 / S60
TRS14 Tiltrotator: 605-4748	14-19	HCS60 / HCS60
TRS14 Tiltrotator: 605-4754	14-19	Pin-on / HCS60
TRS14 Tiltrotator: 605-4753	14-19	Pin-on / HCS60
TRS14 Tiltrotator: 605-4755	14-19	Pin-on High Flow / HCS60
TRS14 Tiltrotator: 605-4756	14-19	Pin-on High Flow / HCS60
TRS14 Tiltrotator: 605-4766	14-19	Pin-on / HCS65
TRS14 Tiltrotator: 605-4768	14-19	Pin-on / HCS65
TRS14 Tiltrotator: 605-4770	14-19	Pin-on High Flow / HCS65
TRS14 Tiltrotator: 605-4769	14-19	Pin-on High Flow / HCS65
TRS14 Tiltrotator: 605-4763	14-19	HCS65 / S65
TRS14 Tiltrotator: 605-4757	14-19	HCS65 / HCS65

Vibratory Plate Compactors

Vibratory action and dynamic force provides excellent compaction in a compact size.

Model	Impulse Force	Cycles/Minimum	Base Plate Width
CVP75	16508 lb / 74 kN	2200	29 in / 737 mm