M314 - Tier 4 / Stage V

Engine Power - ISO 14396: 134 hp / 100 kW
Operating Weight Maximum: 39680 lb / 18000 kg
Maximum Travel Speed: 23 mile/h / 37 km/h

The Cat® M314 Wheel Excavator offers high performance with simple-to-use technologies to help boost operator efficiency. With easy-to-use controls, Cat tiltrotator (TRS) integration, a comfortable cab, and long service intervals, the M314 helps save you time and money.

Loan Calculator Credit Application

Build & Quote

M314 (07E) Product Brochure (Aus-NZ, Europe, N Am, S Korea) M314 (07E) Technical Specifications (Aus-NZ, Europe, N Am, S Korea)

Specifications
Equipment
Related Products

Engine
Engine Power - ISO 14396	134 hp / 100 kW
Engine Power - ISO 14396 (DIN)	136 hp (metric)
Engine Model	Cat® C3.6
Net Power - ISO 9249	127 hp / 95 kW
Net Power - ISO 9249 (DIN)	129 hp (metric)
Bore	3.9 in / 98 mm
Stroke	5 in / 120 mm
Displacement	221 in³ / 3.6 l
Biodiesel Capability	Up to B20¹
Emissions	Meets U.S. EPA Tier 4 Final, EU Stage V, and Korea Stage V emission standards.
Note (1)	Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, Clean Emission Module (CEM) exhaust gas aftertreatment, alternator, and cooling fan running at intermediate speed. Rated speed 2,000 rpm. Advertised power is tested per the specified standard in effect at the time of manufacture.
Note (2)	¹Cat diesel engines are required to use ULSD (ultra-low sulfur diesel fuel with 15 ppm of sulfur or less) or ULSD blended with the following lower-carbon intensity fuels** up to: 20% biodiesel FAME (fatty acid methyl ester)* or 100% renewable diesel, HVO (hydrotreated vegetable oil) and GTL (gas-to-liquid) fuels. Refer to guidelines for successful application. Please consult your Cat dealer or “Caterpillar Machine Fluids Recommendations“ (SEBU6250) for details. * Engines with no aftertreatment devices can use higher blends, up to 100% biodiesel (for use of blends higher than 20% biodiesel, consult your Cat dealer). ** Tailpipe greenhouse gas emissions from lower-carbon intensity fuels are essentially the same as traditional fuels.

Drive
Maximum Travel Speed	23 mile/h / 37 km/h

Hydraulic System
Main System - Maximum Flow - Implement	71.3 gal/min / 270 l/min
Maximum Pressure - Implement Circuit - Normal	5076 psi / 35000 kPa
Maximum Pressure - Implement Circuit - Heavy Lift	5366 psi / 37000 kPa
Maximum Pressure - Implement Circuit - Travel Circuit	5076 psi / 35000 kPa

Swing Mechanism
Maximum Swing Speed*	9.1 r/min
Maximum Swing Torque	30461 lbf·ft / 41.3 kN·m
Note (1)	*For CE-marked machine default value may be set lower

Machine Weight
Operating Weight Maximum	39680 lb / 18000 kg
Operating Weight Minimum	32190 lb / 14600 kg
Note (1)	Operating weight includes full fuel tank, operator, 500 kg (1,102 lb) bucket and dual pneumatic tires. Weight varies depending on configuration. Typical configurations include a 2200 mm (7'3") stick and a 210 kg (463 lb) quick coupler.

Service Refill Capacities
Fuel Tank	77.9 gal (US) / 295 l
Diesel Exhaust Fluid (DEF)	5.3 gal (US) / 20 l
Cooling System	5.3 gal (US) / 20 l
Hydraulic Tank	23.8 gal (US) / 90 l
Hydraulic System - Including Tank	58.1 gal (US) / 220 l

Dimensions
Boom	Variable Adjustable Boom 5 m (16' 6")
Stick	2.2 m (7' 3")
Bucket	GD 0.76 m³ (0.99 yd³)
Shipping Height - Top of Cab	10.9 ft / 3315 mm
Shipping Length	26.9 ft / 8210 mm
Support Point	11.3 ft / 3450 mm
Tail Swing Radius	7.1 ft / 2150 mm
Counterweight Clearance	4.1 ft / 1260 mm
Ground Clearance	1.1 ft / 335 mm
Undercarriage Length	16.1 ft / 4920 mm
Wheel Base	8.2 ft / 2500 mm

Working Ranges and Forces
Boom	Variable Adjustable Boom 5 m (16' 6")
Stick	2.2 m (7' 3")
Bucket	GD 0.76 m³ (0.99 yd³)
Digging Height	32.1 ft / 9780 mm
Dump Height	23 ft / 7010 mm
Maximum Digging Depth	17.4 ft / 5290 mm
Maximum Vertical Wall Digging Depth	13.9 ft / 4250 mm
Maximum Reach at Ground Line	28.4 ft / 8650 mm
Stick Forces (ISO)	15961 lbf / 71 kN
Bucket Forces (ISO)	23605 lbf / 105 kN
Note (1)	Range values are calculated with a GD bucket (CW-S) and CW-20S-D.4.N quick coupler with a tip radius of 1387 mm (4'7"). Force values are calculated with heavy lift on, a GD bucket (pin-on) and a tip radius of 1224 mm (4'0").

Air Conditioning System
Note	The air conditioning system on this machine contains the fluorinated greenhouse gas refrigerant R134a (Global Warming Potential = 1430). The system contains 0.8 kg (1.8 lb) of refrigerant, which has a CO2 equivalent of 1.144 metric tonnes (1.261 tons).

Sustainability
Recyclability	91%

Standard Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
ELECTRICAL SYSTEM
- LED lights on boom and cab
- Programmable time-delay LED working lights
- Roading and indicator lights, front and rear
- Maintenance free batteries
- Centralized electrical disconnect switch
ENGINE
- Cat C3.6 single turbo diesel engine
- Power mode selector
- One-touch low idle with auto engine speed control
- Automatic engine idle shutdown
- 52° C (125° F) high-ambient cooling capacity
- Cold start capability -18° C (0° F)
- Double element air filter with integrated pre-cleaner
HYDRAULIC SYSTEM
- Boom, stick, and bucket drift reduction valves
- Automatic hydraulic oil warm up
- Heavy lift mode
SAFETY AND SECURITY
- Rear and right-side-view cameras
- Wide angle mirrors
- Signal/warning horn
- Lockable disconnect switch
- Anti-skid plate and countersunk bolts on service platform
SERVICE AND MAINTENANCE
- Scheduled Oil Sampling (S·O·S?) ports
- Integrated vehicle health management system
TECHNOLOGY
- VisionLink®
- Remote Flash and Remote Troubleshoot
UNDERCARRIAGE AND STRUCTURES
- All wheel drive
- Automatic brake/axle lock
- 3300 kg (7275 lb) counterweight
CAB
- Sound-suppressed ROPS cab
- Keyless push-to-start engine control
- Height-adjustable console, infinite with no tool
- High-Resolution 254 mm (10 in) LCD touchscreen monitor

Optional Equipment

NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
BOOMS AND STICKS
- 4650 mm (15'3") One-Piece Boom (Europe, Aus-NZ only)
- 4400 mm (14'5") One-Piece Boom (South Korea only)
- 5028 mm (16'6") Variable Adjustable Boom
- 2200 mm (7'3") stick
- 2500 mm (8'2") stick
- 2900 mm (9'6") Drop Nose stick without bucket linkage (Europe only)
ELECTRICAL SYSTEM
- LED lights on chassis (left-hand, right-hand) and counterweight
- Electrical refueling pump
HYDRAULIC SYSTEM
- Boom/stick lowering check valves
- Bucket cylinder check valves
- One-slider joysticks
- Two-slider joysticks
- Joystick Steering
SAFETY AND SECURITY
- 360° visibility
- Travel alarm
- Inspection lighting
- 2D E-fence
- Cab avoidance
SERVICE AND MAINTENANCE
- Automatic lubrication system for implement and swing system
TECHNOLOGY
- Cat Grade with 2D
- Cat Grade with 2D with Attachment Ready Option (ARO)
- Laser catcher
- Cat Grade 3D Ready
- Cat Grade Connectivity
- Cat Grade with Assist
- Cat Payload
- Cat Tiltrotator (TRS) integration
UNDERCARRIAGE AND STRUCTURES
- 9.00-20 14 PR, dual tires (South Korea only)
- 10.00-20 16 PR, dual tires
- 10.00-20, dual, solid rubber tires
- 300-80-22.5 dual pneumatic, spacerless tire (Europe only)
CAB
- Operator Protective Guard (OPG)
- Openable two-piece front window (laminated)
- Fixed one-piece front window (P5A classified)

Equipment Management

Cat® Equipment Management gives you access to the data you need to keep your equipment on the job site and earning money. You can track equipment location and hours, monitor machine use and health, then take informed action that will keep your operation running smoothly, efficiently and profitably.

Model
VisionLink®
Cat Remote Troubleshooting

GC Hammers

Cat® hammers make short work of your demolition, construction, and quarry needs. Combine the simple, lightweight design of the GC Hammer series with the reliability, durability, and value you expect from Cat products. The result is a low cost per hour solution providing the consistent power and performance you need.

Model	Blows per Minute	Minimum Operating Weight	Rated Flow - Minimum
H110 GC S	450 to 650	2599 lb / 1179 kg	21 gal/min / 80 l/min
H115 GC S	450 to 800	3098 lb / 1405 kg	24 gal/min / 90 l/min

Performance Hammers

Cat® hydraulic hammers make short work of your demolition, construction, quarry and production breaking needs. Cat Hammers are high performance breakers, designed to help you get the most from your Cat excavators.

Model	Blows per Minute	Minimum Operating Weight	Rated Flow - Minimum
H110 S	450 to 1000	2090 lb / 950 kg	16 gal/min / 60 l/min
H115 S	370 to 800	2354 lb / 1070 kg	19 gal/min / 70 l/min

Secondary Pulverizer

Non-rotating hydraulic pulverizer reduces concrete and separates rebar.

Model	Cycle Time - Open	Cycle Time - Close	Crushing Force - Primary Cutter
P218 Secondary Pulverizer	1.8 s	1.2 s	351 Sh Ton / 3125 kN

Tiltrotators

Helps you get the job done faster with the quality you expect from Cat products. Integrated to your excavator, Tiltrotators are productive, easy-to-use, and add value to your operation. Tiltrotators are a versatile solution providing enhancements to your operation.

Model	Machine Class	Interface Options: Top-Bottom
TRS10 Tiltrotator: 516-6765	11-16 ton Excavators	S60 / S60
TRS10 Tiltrotator: 555-1563	11-16 ton Excavators	Pin-on / S60
TRS10 Tiltrotator: 516-6766	11-16 ton Excavators	Pin-on / S60
TRS10 Tiltrotator: 605-4740	11-16	Pin-on / HCS60
TRS10 Tiltrotator: 605-4732	11-16	HCS60 / HCS60
TRS10 Tiltrotator: 605-4746	11-16	Pin-on High Flow / HCS60
TRS10 Tiltrotator: 605-4738	11-16	Pin-on / HCS60
TRS10 Tiltrotator: 605-4744	11-16	Pin-on High Flow / HCS60

Vibratory Plate Compactors

Vibratory action and dynamic force provides excellent compaction in a compact size.

Model	Impulse Force	Cycles/Minimum	Base Plate Width
CVP75	16508 lb / 74 kN	2200	29 in / 737 mm